POWER-ALL® ECO-DAPTER® - Deluxe Kit

Power-All® ECO-Dapter® 9 VDC power supply Deluxe Kit.

In partnership with Carbonfund.org, the ECO-Dapter®’s carbon footprint is neutralized through the purchase of carbon offsets.  Carbonfund.org’s certified carbon reductions are third party audited to assure the highest standards and are retired rather than being re-used.

The Power-All ECO-Dapter® meets the stringent Level VI energy efficiency standards set out by the U.S. Department of Energy.  This means that the ECO-Dapter® consumes less power, conserving natural resources while also eliminating the waste and environmental hazards associated with disposable batteries.

In addition to environmentally friendly operation, the ECO-Dapter® provides ultra-quiet, reliable, high-current power to your effects so they can operate at their peak performance levels.

The ECO-Dapter® power supply features the following:

• 9 VDC, 2000 mA regulated power supply
• Meets DOE Level VI energy efficiency standard
  
• Ultra-low noise floor for silent operation
• Environmentally-friendly, Recycled/Recyclable packaging
• LIFETIME WARRANTY – never buy another power supply!
• Powers all your 9 VDC pedals from a single supply
• Space-saving profile takes up only one outlet space
• Special low-noise circuitry reduces ripple current and hum
• Ferrite-core filter module on power output cable reduces noise and hum
• Powers 9 VDC effects from any electrical outlet in the world (100-240VAC)
• 10-foot, 18-gauge power cable eliminates need for an extension cord

In addition to the ECO-Dapter® power supply, the PA-9ECD Deluxe Kit also contains:

• (1) Cable-11/R eleven-connector right-angle Daisy Chain with Lo-Pro™ spring-loaded jacks for extra secure connections—no more losing power mid-solo!
• (1) Cable-Black right-angle Extension Cable provides an additional 10.5” of length for longer power runs, over-sized pedals or hard-to-reach power jacks.
• (1) Cable-Blue/R right-angle 3.5 mm Phone Plug Jumper Cable for use with EH and other vintage pedals.
  
• (1) Cable-Green Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack.
• (1) Cable-Green/R right-angle Line-6 Jumper Cable – same as above with right-angle male barrel plug.
• (1) Cable-Grey Battery Clip Jumper Cable for pedals with no AC input.
• (1) Cable-Red/Right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals.
• (1) Cable-Red/R right-angle Reverse Polarity jumper cable with spring-loaded jack for powering tip positive pedals.
• (5) Cable Cap insulator sheaths to cover power leads when not in use.

All Power-All Cables utilize our own Lo-Pro™ Plug design which offers the smallest plug dimensions possible in order to save space on your pedalboard and to make connection to your pedals quick, easy and efficient.